How to Install Leaked Jelly Bean firmware 4.2.2 on Samsung Galaxy S3 GT-I9300 manually?

Samsung Galaxy S3 GT-I9300 Firmware 4.2.2 leaked by Sammobile.

NOTE:
This version of Firmware is only for the device named as GT-I9300 or I9300.
Install at your own risk! Download the file from here.


Download Odin From here

After downloading the firmware extract it and you will get a file with .tar.md5 extension



Now from your mobile go to download mode by pressing (Volume down+power button+home button at the same time for 8 sec or more until a screen giving you warning will appear. Now press volume up button to enter the download mode)

Now open Odin And on Odin click on PDA, in PDA load the downloaded file (firmware) which you have downloaded from hotfile.

Make sure your USB debugging is on (Which is in setting's>developer mode)
Now connect your mobile to the PC. I will recommend you to use sgs3's original usb wire.

Now in Odin after connecting your mobile a Blue Com:4 etc will come.

Make sure that the F.Reset time and Auto Reboot are checked.
Re-Partition should not be checked.

Now click on Start, It will take some time to flash the firmware.
After some time your mobile will reboot automatically and you will get  Pass.
You can choose express or custom settings for your mobile
 Screenshots.

Flash this firmware on your own risk i will not be responsible to any damage caused to your device by this post.
Otherwise it is safe to install but it is without modem.
This firmware is only for Middle East.

Thanks!!!
Enjoy


Regards
Toxic Hack

Subscribe to me on Facebook
Mohammad Ammad